Extra Info In regards to the Jasminer X4 1U Ethash-Etchash ASIC Miner

Yesterday we now have revealed our First Fingers-On Expertise with the Jasminer X4 1U Ethash-Etchash ASIC Miner and right this moment we’re persevering with with some helpful details about the gadget for anybody which may personal it already or plans to get a Jasminer X4 to play with. As we’ve already talked about this ASIC miner for Ethash and ETChash is kind of simple to work with each by way of {hardware} and by way of software program because it just about modular by way of {hardware} and with open root SSH entry to the software program data on the gadget. So, right this moment will probably be extra in regards to the software program and what you are able to do to be able to tweak or mess around with the miner to optimize it extra, or possibly overcome some missing function and so on.

The Jasminer X4 1U Ethash-Etchash ASIC miner comes with two choices for configuring and working the miner – a web-based interface and a software program software for Home windows solely. Each function fairly fundamental settings solely – mining pool settings (as much as 3), what algorithm/coin to mine (ETH/ETC) in addition to the working frequency of the miner (200 or 225 MHz). The remaining is dealt with mechanically or set to a predefined worth, thus sort of limiting what’s consumer accessible and making you consider some workarounds should you want one thing particular. We truly had a number of to work with and have discovered an answer, although it might have been nicer if there was a bit extra consumer management out there… a sophisticated settings web page within the net interface possibly. Oh, wait, there truly is one, however it’s hidden and never totally functioning (superior.html) within the newest firmware.

Within the superior management web page moreover the 200 and 225 MHz working frequency there’s additionally an choice to allow 250 MHz as effectively, then there’s additionally an choice for fan management out there (Auto and Handbook modes) and there’s additionally an “Operation Mode” that may be both Excessive-efficiency, Steadiness or Excessive-performance (undecided what these truly do). However even should you work round these settings attempting to set them doesn’t work apparently as there are different measures set to sort of restrict your entry or the options won’t be correctly carried out in any respect… undecided which one it’s. We’ll get again to those in a second with some extra particulars.

The sl_miner management software program that’s solely out there for Home windows working techniques has just about the identical settings for the miner, plus a straightforward choice to scan an IP vary to see what’s the IP deal with of your miner generated by the DHCP server, to be able to entry its net interface. This software program makes it simple to configure and monitor your miner from a single window and what it does higher than the Net-based management panel is making it simpler to manage a number of Jasminer X4 miners that you just may need. With the sl_miner software program you don’t must open completely different web-based management interfaces for every of the miners in case you have a couple of that’s.

Now, keep in mind that after you boot up the Jasminer X4 miner it could appear to be idle and never working for some time or in any respect. You have to to have some endurance because the gadget wants about 20 minutes of time to be able to generate the DAG file earlier than it will possibly truly begin mining, so be simple on the reboots or config adjustments that can require you to restart the miner. The excellent news is that altering pool settings and working frequency of the miner doesn’t want a reboot of the system, altering the algorithm you employ nonetheless does.

If you’re feeling adventurous you possibly can login onto the Jasminer X4 management board over SSH with putty or one other such shopper and discover the gadget on the software program facet. The default username is root and the password can also be root and you’re prepared to begin wanting round. The miner software program is named Jasminer and is model 2.05 within the newest firmware and to make issues a bit simpler for you we now have proven the listing of instructions supported by the miner. A lot of the issues right here should not a lot of an curiosity, other than the choice to set the fan velocity and to alter the working frequency of the gadget. Discover that on the screenshot it says JasMiner-Brick 2.05 and there’s a motive for that though we’re utilizing the Jasminer X4 1U right here, however extra on that in a second.

Do observe that the jasminer miner software program is executed and operating as quickly because the gadget begins and there’s a monitoring script that can restart it if it senses that the miner has stopped for some motive. So, simply issuing a “killall -9 jasminer || true” command (with out the quotes) will cease the miner for a second after which it’s going to begin again once more, it’s worthwhile to additionally cease the monitoring script to be able to manually run jasminer with your personal settings. For stopping the monitoring script as effectively you will have the next command “killall -9 monitor || true“, do observe that it might be clever to begin it afterwards or reboot the miner to mechanically revert issues moreover the config file.

By default, the miner runs with a config file that’s being created and adjusted from the online interface or the sl_miner software program, the precise command line that’s used to begin it’s as follows:

jasminer --version-file /and so on/machine --config /media/configs/jasminer.json --syslog

Contained in the config file you solely have the pool data, the algorithm and working frequency together with some API information. There is no such thing as a choice to manually management the fan velocity from the config file, it’s worthwhile to run the miner with the “--fan_speed” set to the share worth you need and that may be an issue if you wish to do it completely. The configuration file is saved on the reminiscence of the gadget, however the remainder of the software program is loaded into reminiscence from a bootable picture, so no everlasting adjustments might be saved and out there while you reboot the gadget sadly.

So, handbook fan management will be robust subject to cope with the Jasminer X4. The automated mode energetic by default apparently follows the temperature and adjusts, however you may simply wish to have the followers operating at 100% on a regular basis for example. Otherwise you may wish to modify the miner with extra highly effective followers and run them at decrease RPM to make them silent whereas nonetheless offering greater than satisfactory cooling for the ASIC chips. There are some attainable workarounds right here which may provide help to do issues like that, however they may most probably not be everlasting and can must be reapplied after a reboot as a result of means the gadget operates.

One factor that you would be able to completely do to be able to have the followers operating at most RPM is to depart solely the facility pins of the cooling followers related to the miner’s management board. That nonetheless will current you with one other subject – no reporting of FAN RPM to the software program and this can set off a security measure that can stop the gadget from mining. It’s going to nonetheless run and calculate a DAG, however as quickly because it wants to begin hashing it’s going to simply not begin as it’s going to suppose that the followers should not working and it’ll overheat if it begins mining. You’ll find yourself in the identical state of affairs in case you are fascinated about some various cooling strategies as effectively akin to immersion cooling the place you won’t want to attach any cooling followers in any respect. Getting followers reported at zero RPM will set off a failsafe mechanism that can stop the miner from beginning to hash… there’s a straightforward resolution for that as effectively.

We now have remembered that there’s a smaller Jasminer X4 Brick miner that has a decrease hashrate and is totally passively cooled, so why not flash the firmware of that miner (sure, it’s going to work on the X4 1U as effectively) and eliminate the annoying fan security measure. Do not forget that this miner doesn’t have followers, so no an alarm firing when followers are reporting zero RPM… they do it anyway as no followers are related there within the first place. The miner will nonetheless run any followers related to the management board simply positive, it’s going to simply not stop you from mining as there isn’t a fan failure detecting mechanism out there on this model of the miner.

There’s a small catch nonetheless, by default the web-based interface for firmware upgrades will refuse you to flash the firmware for the X4 Brick, the one factor it’s worthwhile to do is simply rename the unique file you obtain from the Jasminer’s web site from JasMiner-X4-Brick-20220726-183045.tar.gz to JasMiner-X4-20220726-183045.tar.gz after which it is possible for you to to flash the X4 Brick firmware onto your X4 1U simply positive. Efficiency and have clever we see no distinction with the X4 Brick firmware in comparison with the unique X4 1U one other than the shortage of fan failure mechanism in place and the truth that only a single working temperature is being reported by the gadget and never a spread.

To date, so good. However what about operating the miner at the next frequency to be able to enhance the mining efficiency? By default, you’ve got solely 200 MHz and 225 MHz out there, however you too can make the miner run completely at 250 MHz with slightly taking part in round. You simply must SSH to the miner, go to the /media/configs folder and edit the jasminer.json configuration file altering the freq setting to 250. Observe that it is a semi-permanent setting change, that means that it’s going to stay in place after rebooting the miner, however might be overwritten as quickly as you modify the mining pool for example. You’ll merely must redo the change once more to be able to have the miner boot at 250 MHz working frequency.

It appears that evidently this setting is likely to be eliminated as an out there choice on account of the truth that it may be an issue for lots of even all the Jasminer X4 to function correctly at that setting with their default setup. In our case the gadget does produce means too many errors and in consequence solely about 50 MH/s hashrate is being reported as a substitute of getting greater than 10 occasions larger efficiency. You’re welcome to attempt to report if it really works for you any higher or not and if it does what hashrate are you getting. It is likely to be an issue of correct cooling, or the 300W energy provide not being sufficient or just because the chips should not Happy with the upper frequency.

Anyway, under yow will discover a fast listing of the three working frequencies of the miner with the facility utilization measured on the wall and a hashrate that’s anticipated at that setting. Do observe that the facility utilization reported is with our silent modification to the miner utilized and that lowers the precise energy used as in comparison with the unique cooling setup:

200 MHz – 237W – 450 MH/s+
225 MHz – 265W – 520 MH/s+
250 MHz – 294W – ~50 MH/s

The Jasminer X4 1U does handle to work simply positive at 225 MHz producing over 520 MH/s of hashrate steady and downside free, so that’s the really helpful working frequency of the gadget to be able to maximize efficiency. If the 250 MHz setting works for you issues is likely to be higher, however not all or any may do. If not working correctly on the larger working frequency you’ll be getting a lot decrease hashrate than anticipated with larger energy utilization because the miner is definitely working, however producing a variety of errors and never correctly hashing more often than not.

Few extra issues that we already talked about within the earlier article, however that must be talked about right here as effectively for those that don’t see each posts. The entire lineup of Jasminer X4 ASIC miners comes outfitted with 5 Gigavbytes of reminiscence, so moreover the gadget not usable for Ethereum mining anymore (as a result of latest swap from PoW to PoS for that one), you will be unable to mine ETHF or ETHW or every other fork that break up off Ethereum on the Merge that occurred final month. These have already got handed a DAG measurement that may match contained in the reminiscence (you possibly can mine them with a decrease hashrate for some time), so take into consideration mining youthful Ethash cash with smaller DAG measurement than 5GB or ETChash ones akin to Ethereum Traditional.

Additionally, at the moment the Jasminer X4 product lineup doesn’t help dual-mining of ETC/ETC coin with ZIL, one thing that might enhance the profitability of the mining {hardware} simply with 30-40%. Sadly, not supported for the second and the identical goes for utilizing the Jasminer X4 on the Nicehash mining platform the place you possibly can additionally intention for larger revenue than simply mining ETC. Nicehash just isn’t at the moment supported and the miner just isn’t connecting to any of the swimming pools on the platform in the meanwhile, although a future compatibility replace including help for these two issues can be a pleasant addition.

We do hope that this additional data and suggestions will be of use and provide help to get extra out of your Jasminer X4 1U ASI miner and should you do have some questions be happy to ask. We’re going to proceed taking part in with this miner for some time for certain and can report extra about it afterward, hopefully together with excellent news concerning improved or added options. In the meantime subsequent we’re going to goal our consideration to a competitor of Jasminer X4 – the iPollo vary of ASIC miners which were on our radar for some time now too.